Bathrooms. Pipes crammed behind plasterboard, cables hidden, steam working its way into every corner. All squeezed into the tightest spot in the house. Strange, how the smallest room is where trouble usually starts. The way to get bathroom renovation planning right? Sort out the boring, practical bits first. Otherwise you’ll be hacking through tiles to chase a leak or chasing down a forgotten wire. And nobody wants that.
Bathroom renovation planning starts with the layout
Start with the toilet. It’s the one thing you can’t just shift to the other side of the room. The waste pipe needs a steady fall straight to the soil stack, and that’s not something you want to reroute unless you have to. Once you know where the loo sits, everything else follows. Bath or shower next. Both, or just one? Every change means more pipes and more mess. We always ask the plumber what’s simple and what’s likely to be a headache, it saves time and money later.
Storage is usually an afterthought, but it’s what keeps the mess at bay. Bottles, spare toiletries, stacks of towels, the bleach, they all need a proper spot. We look for a vanity with decent drawers, a niche in the shower wall, maybe a tall cupboard in a dead corner. In a small bathroom, every hiding place helps.
Think about how you actually use the space. A busy family bathroom is a world away from a quiet en suite. The routines are completely different.
If you’re both in there getting ready, double sinks or both a shower and bath cut down the waiting. In an en suite, most people skip the bath and go for a larger, more comfortable shower.
Waterproofing: the bit you never see
Most bathroom headaches start with water creeping in where it shouldn't. Once it gets behind the tiles, you’ve got trouble. The only thing that keeps it out is proper waterproofing under the tiles in the shower and any spot that gets really wet. We always ask fitters exactly how they do this. If they can’t take you through their method, and instead just mutter something about grout, walk away.
Think about where water will go if a seal fails. Any decent fitter should talk you through how the shower tray, waterproof layer and tiles all work together. It's not just about keeping the surface smart, but stopping water finding its way into the wall or under the floorboards.
Wet rooms, with a flush shower and no step, demand more care. The whole floor has to be waterproofed and laid so water runs towards the drain. Done well, they’re excellent. But if someone cuts corners here, you’ll know about it soon enough.
Ventilation, heat and light
- An extractor fan that vents outside and is powerful enough for the room.
- A heated towel rail or underfloor heating to dry the room quickly.
- Even lighting at the mirror and suitably rated fittings near water.
- A shaver socket or charging point where it's actually needed.
Poor ventilation is the reason so many bathrooms grow mould within a year. Spend on a good fan and set it to run on after the light goes off.
Heating matters for comfort too. Underfloor heating is lovely in a bathroom and frees wall space, while a good towel rail dries towels and warms the room. Many bathrooms use both.
Plan the pipes, the fan and the waterproofing. The tiles are the easy decision.
Then the enjoyable part
Now for the bit you actually see. Tiles, taps, everything out in the open. Large-format tiles cut down on grout lines, so the room looks quieter, less busy. Wall-hung loos and basins do two things. They pull the eye up and make it less of a job to sweep underneath. For taps and showers, we stick to brands with spares you can actually get hold of. Cheap brassware might look fine for a year or so, but then it’s wobbly handles and drips. False economy.
Look closely at the tiling. Check corners, those little recesses in a niche, the edge where the wall meets a shower tray. Are the tile cuts neat and clean, or is it all jagged filler? Grout lines, do they run straight or do they drift? That’s how you tell if someone knows what they’re doing. You can’t hide it.
Floor tiles need grip as much as good looks. A smooth tile in the shop can turn lethal with wet feet. Always check the slip rating, and if you’re going for a wet room or walk-in, make sure there’s some texture underfoot.
Get every single thing delivered before anyone starts work. Tiles, loo, vanity, tray, basin, the lot. Most half-finished bathrooms are held up by one thing missing, usually a vanity unit stuck on a lorry somewhere.
Choose grout and silicone colours when you pick the tiles, not later on. Pale grout on the floor will show every muddy footprint. We’d pick a mid-grey to hide the worst of it. And always find out how they’ll seal round the bath or the shower tray. That’s where leaks start. We see it all the time.
Agreeing the scope
- Who's actually ordering each thing, and who makes sure it turns up without a crack in it?
- Are the messy bits, waterproofing, plastering, tidying up after, part of the job or not?
- How long will you have to manage without a working loo or shower?
- Is there someone qualified signing off the electrics afterwards?
- And once it's all in, what backs up the fitting if something goes wrong?
Living without a bathroom
Got just one bathroom? You'll need a plan. Some fitters will leave the loo connected overnight, but not all. Ask right at the start. Best to line up a few days away, just in case, you can't make do without.
Accessibility for the years ahead
A walk-in shower with no step, a door you don’t have to squeeze through, and a bit of timber tucked behind the wall tiles for a grab rail later, none of this costs much if you’re already ripping the room out. You won’t notice them now. One day, you might be glad they’re there.
Our view
Sort the layout first. Deal with waterproofing before anything else, then think about vents and how you'll heat the room. Leave tiles till the end. Order everything you’ll need before you start pulling the old bathroom apart. We always go for a fitter who brings up tanking and sealing without being prompted. That’s what keeps the rot and hassle at bay.