People love to talk about new boilers or a solar panel on the roof. The experts always start with something simpler. Keep the heat where you want it. Home insulation sits quietly in the background, but skip it and all the high-tech gear in the world won't help much.
Where heat really escapes
Warm air rises, so a poorly insulated roof loses a lot. Walls lose plenty too, especially solid ones in older houses. Then come windows, floors and the gaps nobody thinks about: around pipes, loft hatches, letterboxes and skirting.
You can often see the weak spots for yourself. Frost melting first on one part of a roof, cold patches on walls behind furniture and black mould in corners all point to places where heat escapes or moisture gathers.
Every house is different, which is why it's worth knowing where yours is weakest before spending a penny.
Home insulation starts with draughts and the loft
Draught proofing is the cheapest job in the whole list and one of the most noticeable. Seal gaps round doors and windows, the loft hatch, and where pipes go through walls. Keep air bricks and vents clear, though: those are meant to be open.
Chimneys are another sneaky draught. An unused open fireplace can pull warm air straight up and out. A removable chimney balloon or a fitted cap with ventilation stops the loss while letting the chimney stay dry.
Then the loft. Topping up thin insulation to a good depth is usually straightforward. If you use the loft for storage, raise the boards on legs so the insulation isn't squashed.
Walls: cavity, solid and the options
If you've got cavity walls, that's two courses of brick with a gap between them, there's usually the option to fill that space with insulation. It's a job that's done from outside, often finished in a day. Solid walls are a different story. No gap, so the insulation has to go on either side. It's a bigger job, especially with older houses, but the difference in warmth can be dramatic.
Don't take a punt on what type of wall you've got, or whether there's already insulation. Many older cavities were filled decades ago, sometimes poorly. You only know by checking. The proper way is a small drill hole, so someone can see what's inside. Then you know where you stand.
External wall insulation wraps a thick coat round the outside before a fresh render or new cladding goes on. Internal boards fix to the inside, which does mean losing a bit of space. There's no rule that fits every house. We'd look at the layout, the brickwork, how much room you've got to spare.
Floors, windows and the rest
Suspended timber floors can be insulated from below if there's access, or from above during a renovation. It cuts draughts underfoot remarkably well. Windows come later in the order for most homes, unless they're single glazed or badly fitted.
Solid floors are harder to insulate after the fact, and usually only make sense during a bigger renovation when the floor is being dug up anyway. A thick rug and draught-free skirting help in the meantime.
Insulation is the one upgrade you never see and always feel.
An energy survey shows the weak spots
An energy survey shows you the house as it really is. Loft, walls, windows, pipework, draughts, everything gets looked at. With a thermal camera, the cold spots stand out. You can see for yourself where heat's slipping away. No need to guess, and you won't throw money at the wrong problem.
The report usually lists jobs by what you'll save and what each step will cost. It's a plan, not a shopping list. Take it at your pace. Most people spread the work over a few years.
Don't forget ventilation
A well-insulated, well-sealed home needs fresh air. Without it, moisture from cooking, showers and breathing builds up as condensation and mould. Extractor fans that work, trickle vents in windows and, in very airtight homes, heat recovery ventilation keep the air fresh.
- Run extractor fans when cooking and showering, and for a while after.
- Keep trickle vents open.
- Don't block air bricks when insulating.
- Dry washing outdoors or with ventilation when you can.
Choosing an installer
- Have you insulated houses like mine, and can I see them?
- Which materials do you recommend for these walls, and why?
- How will you keep ventilation working afterwards?
- What guarantee comes with the work, and who backs it?
- Will building regulations apply, and who handles the paperwork?
Good installers talk about moisture and ventilation as much as about warmth. That's the sign they understand that a house has to breathe as well as stay warm.
If grants or schemes are available for your home, ask early. They change often, and some require specific certified installers.
Our view
Start with the draughts. Next, the loft. Once those are done, turn to the walls and floors, what works will depend on your house. If you’re not sure, get someone in for an energy survey. As you go, remember the ventilation. Not flashy, but it’s what makes the rest worthwhile.


